Tags > Fretwork

A month in the shop: wrapping up Delfinen

8 Apr 2024 - action, delfinen, electronics, fretwork, nut, setup

Going through the final stages of wrapping up Delfinen: getting the setup just right, and soldering up the electronics.

Read more...

A still from a video showing Michael sat in front of the camera holding a guitar, showing the headstock of it to the camera. On the headstock it says "MWDales" in script and "Delfinen" under that.

A Week in the Shop

31 Oct 2023 - delfinen, finishing, fretwork, hästen, verkstaden

Putting in the time: nothing new this week, just a week of getting on with the jobs I started previously in the workshop, with more staining, more oiling, and more fret-dressing and polishing.

Read more...

A photo of two guitar necks hung up on rack in room otherwise filled with wood on shelves. Both necks are made from maple: one is hung so you can see the back, showing the birds-eye figuring, and the other is hung so you can see the fretbaord is covered in masking tape.

A Week in the Shop

22 Oct 2023 - delfinen, finishing, fretwork, hästen, oiling, painting, staining, verkstaden

Lots going on in the workshop this week as I push three guitars, body and neck, through the finishing process.

Read more...

A photo of a guitar body being held over a workbench, caught in the sunlight coming through an unseen window. The face of the body is yellow stained birds-eye maple, and the top 5mm of the side is natural unfinished birds-eye maple, and then the back of the guitar is painted gloss black.

A Week in the Shop

5 Aug 2023 - bass, design, fretwork, Fusion 360, grain filler, hästen, verkstaden

This week I had both the highs and lows as my neck building exceeds my expectations before I'm knocked down a peg or two on the next stage. I also prep two guitar bodies ready for the stray-booth, and I do some CAD work on bass guitar work.

Read more...

Two guitar bodies sit on the workbench, ready to go to the spray booth for painting. Both have a stick screwed into the neck pocket to be held in the clamp during spraying, and one has a cardboard mask on one side as only the rear will be painted.

A Week in the Shop

30 Jul 2023 - fretwork, grain filler, hästen

I move the Hästen guitar build forward slowly, moving both the body and the neck forward with generous application of elbow grease.

Read more...

A shaped but unpainted guitar body sits on a workbench surrounded by sanding disk.

A Week in the Shop

10 Jun 2023 - älgen, blues deluxe, electronics, fretwork, hästen, inlays, lacquer, noel gallagher, spraying

A busy week in the shop: getting ready to spray a 3D-printed guitar body; learning to use metal rods for dot-inlays on a neck; and when copper insulation goes rogue inside a guitar.

Read more...

A selfie of me in the spray booth, wearing all my PPE (respirator, eye-protectors, goggles), and behind is the over-exposed 3D-printed body of a guitar ready for spraying with lacquer.

A Week in the Shop

22 Apr 2023 - fretwork, necks, paintstik, plectrums

The Älgen guitar is now something I get to live with for a little, two necks get some work done, I worry about how to promote myself at shows, and I explore some guitar music outside my usual listening.

Read more...

A rack of guitars sits next to an amp and pedalboard. The most obvious guitar on the rack is Älgen, which is part 3D-printed, making it stand out from all the other guitars.

A Week in the Shop

19 Feb 2023 - 3d printing, älgen, bhm, delfinen, fretwork, memphis minnie

A shorter weeknotes this week, as I've been heads down on slow tasks: fretwork and 3D print iterations. I also learned about the person who wrote one of my favourite Led Zepplin songs back in 1929.

Read more...

A work in progress guitar neck, shaped and fretted, sat on a workbench. Beside the neck is a black sharpie pen, and closer inspection reveals all the frets have been drawn on with the sharpie ready for fret shaping work.

A week in the shop

18 Jul 2022 - älgen, fretwork

Pondering about what it is I do, pushing towards the finishing straight with Älgen build, and learning a new process for my fretwork.

Read more...