Michael Winston Dales Guitars: Jigs

A Week in the Shop

5 May 2023 - delfinen, emily hopkins, harp, hästen, jigs, routing, templates, verkstaden

A quick review of all the in-progress guitar builds, a bunch of progress on the offset build, putting an excessively complicated jig to use, and finally some fun facts about harps.

Three work in progress guitars sit on a workbench, each a body with a neck beside it. All are raw wood and unfinished. The left body has pickup cavities and a neck pocket cut, and the neck is just roughly shaped with a template on top. The middle one is the most complete, with the neck fretted and all the body holes cut. The right body has only a neck pocket but no other holes init, but the neck is fretted and otherwise complete.

Getting back to the Shop

16 Jan 2023 - älgen, delfinen, jigs, laser-cutting

Getting back into the workshop after a brief hiatus, and starting out with finding a great new way to radius my fretboards.

The rear body of the guitar on a carpet mat on a workbench, showing the copper covered inside of the electronics cavity. To the side you can see a scalpel and bits of tape, and on the body to one side you can see the translucent orange acrylic cover for the cavity that will let the shiny copper inside be visible once the cover is on.

A Week in and out the Shop

19 Sep 2022 - 3d printing, älgen, delfinen, ferrules, fusion 360, jigs, laser-cutting, patching, templates

A week of having more questions than answers as try to push the Delfin build forward.

A week in the shop

15 May 2022 - älgen, delfinen, fusion 360, jigs, laser-cutting, templates

Dealing with 3D print shrinkage; looking at the tiny design details users will never see; how a damaged guitar body leads to a better design; and just what makes a guitar a Michael Dales guitar?

A return to the shop

2 May 2022 - 3D printing, älgen, fusion 360, jigs, laser-cutting, palm router, templates

After a hiatus due to reasons, I'm finally getting time back in the workshop. This week mostly redesigning my tooling after some initial setbacks on my hybrid guitar.