Tags > Templates

A Week in the Shop

13 Aug 2023 - älgen, delfinen, hästen, OSHCamp, painting, spray-booth, templates, toothbrush, verkstaden, wuthering bytes

A busy day in the workshop, including finally learning how to spray paint bodies using the booth and spray-gun, and prepping my talk for OSHCamp at the end of the month.

Read more...

Two guitar bodies are mounted on a rack in the wall of the workshop, the lower one is painted in white primer, and the upper one has black primer around the sides, the top being covered with a cardboard screen.

A Week in the Shop

5 May 2023 - delfinen, emily hopkins, harp, hästen, jigs, routing, templates, verkstaden

A quick review of all the in-progress guitar builds, a bunch of progress on the offset build, putting an excessively complicated jig to use, and finally some fun facts about harps.

Read more...

Three work in progress guitars sit on a workbench, each a body with a neck beside it. All are raw wood and unfinished. The left body has pickup cavities and a neck pocket cut, and the neck is just roughly shaped with a template on top. The middle one is the most complete, with the neck fretted and all the body holes cut. The right body has only a neck pocket but no other holes init, but the neck is fretted and otherwise complete.

A Week in the Shop

6 Mar 2023 - 3D-printing, älgen, birthday, laser-cutting, telecaster, templates

Rushed weeknotes for a rushed week: I make some progress on älgen, meet the real version of what it's named after, and spend far too long nursing a laser-cutter.

Read more...

The pub sign for The Duke of Cumberland which shows a painting of a 17 or 18th century duke playing a Fender Telecaster with a jazz ensemble behind him.

A Week Out the Shop

26 Feb 2023 - archtop, bhm, cad, delfinen, fusion 360, rendering, templates, verkstaden

A week spent paying off some CAD debt to fuel the workshop time, and a look at another builder of some amazing archtop guitars.

Read more...

A 3D render of my älgen guitar design, which has a central wooden core that starts as the neck and continues the full length of the body, and then has a 3D printed latice either side where the guitar body would usually be.

A Week in the Shop

1 Oct 2022 - 3d printing, älgen, delfinen, sanding, templates

Lots of sanding and tidying on my Älgen guitar build as it gets ready for finishing, some last minute template redesigns, and I learn how to use a new 3D printed.

Read more...


A Week in and out the Shop

19 Sep 2022 - 3d printing, älgen, delfinen, ferrules, fusion 360, jigs, laser-cutting, patching, templates

A week of having more questions than answers as try to push the Delfin build forward.

Read more...


A Week in the Shop

12 Sep 2022 - älgen, delfinen, drilling, filling, sanding, templates

The Delfin guitar becomes one, as the body and neck are joined, and Älgen gets close to being ready for finishing.

Read more...


A week in the shop

12 Jun 2022 - 3d printing, älgen, delfinen, templates, thingiverse

My Älgen build finally starts to become a guitar in my eyes, fun with 3D prints, and so so much sanding.

Read more...


A week in the shop

15 May 2022 - älgen, delfinen, fusion 360, jigs, laser-cutting, templates

Dealing with 3D print shrinkage; looking at the tiny design details users will never see; how a damaged guitar body leads to a better design; and just what makes a guitar a Michael Dales guitar?

Read more...


A return to the shop

2 May 2022 - 3D printing, älgen, fusion 360, jigs, laser-cutting, palm router, templates

After a hiatus due to reasons, I'm finally getting time back in the workshop. This week mostly redesigning my tooling after some initial setbacks on my hybrid guitar.

Read more...